Make your own lamp shade from faux leather paper and rattan
Make your own lamp shade from faux leather paper and decorate it further with rattan details.
How to do it
Place the lamp shade on top of the faux leather paper. Mark with a pencil on the paper the top and the bottom of the lamp shade whilst rolling the lamp shade a short distance at the time. Add an extra 2 cm to the top and the bottom so that the faux leathe
Cut out the design and fasten it onto the outside of the lamp shade with clothes pegs to keep it in place. Apply glue onto the leather paper where the paper overlaps. Keep the overlaps in place with clothes pegs until the glue is dry.
Cut two pieces of rattan; one measuring 30 x 38 cm and one measuring 12 x 25 cm. Glue the ends together making two tubes; one being 30 cm in height and the other 12 cm in height. Keep the tubes in place with clothes pegs and a piece of string until the gl
Pull out a couple of strings of the rattan so that the holes in the rattan are open and can grip around the lamp shade. Only do this at one end.
Place the small tube onto the top of the lamp shade and the large tube at the bottom. You may attach the rattan tubes onto the lamp shade by tying a small piece of string through a couple of holes in the rattan and the lamp shade.
Finish the rattan tubes with a faux leather paper border glued on with hobby glue. Use clothes pegs to keep the border in place until the glue is dry.
Be very aware not to use a light bulb that gets too warm when using the lamp shade.