Adorable clay and bead charms

1 Knead the clay for about 4 minutes until it is soft and easy to work with. Roll it out on a piece of baking paper to a thickness of around 4 mm.

2 Take another colour of fine clay and knead for around 4 minutes. Roll small balls and place them on the first piece of clay to form small dots as shown in the picture.

3 Gently roll the balls to make the surface even.

4 Use the letter stamp to add whatever letters you want. Gently press the stamp into the clay. Be careful not to push it all the way through.

5 Use a shape cutter and press it all the way through. Afterwards, remove the excess clay.

6 Use a pencil or other pointed object to make a hole for the cord to pass through after the clay has hardened.

7 Bake the clay in a preheated oven at 120 degrees for 18 minutes and then allow to cool.

8 Cut a piece of cord around 40 cm long. Thread it through the carabiner and tie a knot as shown in the picture.

9 Add the desired beads.

10 Finish with a knot.

11 Attach another piece of cord to the carabiner, this time without tying a knot at the top. Thread your charm onto the cord and then the beads you want.

12 After you have attached all the beads you want, finish with a knot. Cut off the excess cord. In the example shown in the picture, around 2 cm is left after the knot.