A hanger made from bamboo rings

1 Cut three pieces of natural twine each measuring 1m. Make a loop and wrap the twine around two bamboo rings and around the loop as shown in the photo.

2 Make the windings 2 cm long. Feed one end of the twine through the loop and pull the end of the starting twine, so that the joint is hidden underneath the windings.

3 Cut off the excess twine.

4 Repeat steps 1-3 on the opposite side and at the top so that the three bamboo rings are tied together as shown in the photo.

5 Cut 5 pieces of natural twine each measuring 2 m. Gather the pieces around the middle of the hanger and tie knots along the gathered pieces of natural twine with a 10 cm space between each knot.

6 Place a flower pot in the hanger.