Halloween spider and bat hair decorations

1 Print the idea PDF. Trace the stencils on the back of the black glitter EVA foam.

2 Cut out the parts. Save the excess EVA foam for later use.

3 Two of each part are required for the headband.

4 Remove the protective paper from the backing.

5 Fold the parts in the middle around the headband.

6 When glueing the parts together, make sure that everything is properly aligned.

7 Place the pieces symmetrically on the headband.

8 Attach two large pom-poms together with sticky base for the spider’s body and attach two small pom-poms for eyes.

9 Remove the protective paper from the self-adhesive eyes.

10 Attach the eyes to the small -.

11 Twist four pipe cleaners together in the middle.

12 Place a dab of sticky base in the middle.

13 Attach the body to the pipe cleaners.

14 Wrap a black glitter pipe cleaner around one side of the headband.

15 Wrap the pipe cleaner 5-6 times around the headband and apply a dab of sticky base on top.

16 Attach the spider to the headband.

17 Pull the end of the pipe cleaner over the spider’s body.

18 Now wrap the end around the headband to secure it.

19 Bend the spider’s legs in two places as shown. Allow the spider to dry for 24 hours before using the headband.

20 Cut a piece of tulle to around 20 x 4 cm.

21 Open the hair clip, insert the tulle between the clip and tie a knot.

22 Trim the ends slightly.

23 Cut two circles with a diameter of 6-7 cm.

24 Fold the circles in half twice.

25 Place a dab of sticky base on top of the knot.

26 Attach the two folded circles, one on each side, to form a bow.

27 Place a dab of sticky base on top of the bow.

28 Attach the wooden bead on top. Allow to dry for 24 hours before using the hair clip.

29 Cut two black pipe cleaners in half.

30 Twist the four pipe cleaner halves together in the middle.

31 Place a dab of sticky base in the middle.

32 Attach a large pom-pom.

33 Shape the pipe cleaners into legs by bending them twice as shown.

34 Cut two pieces of tulle measuring around 20 x 4 cm and tie them to the clip as shown in step 21. Add eyes to the spider and attach it to the tulle with sticky base. Allow to dry for 24 hours before using the hair clip.

35 Cut six strips of tulle of around 20 x 2 cm.

36 Tie each strip tightly into a knot on the elastic.

37 Twist three of the ends to form a point.

38 Thread it with beads.

39 Use a small dab of sticky base to glue the wooden bead onto the tulle at the top of the bead.

40 Cut off the ends. Allow to dry for 24 hours before using the elastic.

41 Use the stencil to draw two small bat wings on the remaining glitter EVA foam.

42 Remove the protective paper and stick the wings together in the middle around the hair tie.