Creative idea
Cast soy wax bubble candles
#v16972
Cast the most delightful little bubble candles out of soy wax. The process is extremely easy – simply melt the wax in a water bath and add colour to give the candles a more vibrant look. Soy wax is a 100% vegan material that produces 80-90% less soot than traditional candles.
#v16972
How to do it
Video guide Get step-by-step instructions on how to make bubble soy candles.
1 
Measure 40 g of wax for one candle. The amount of colour depends on the desired shade of the candle – from 0.1 g to 1 g of colour per 40 g of wax.
Measure 40 g of wax for one candle. The amount of colour depends on the desired shade of the candle – from 0.1 g to 1 g of colour per 40 g of wax.2 
Melt the wax in a water bath (approx. 20 min) or use a microwave and run at full power in intervals of 30 seconds (total time of 2–3 min.). The melting temperature is between 55 and 65 degrees. Do not heat above 95 degrees.
Melt the wax in a water bath (approx. 20 min) or use a microwave and run at full power in intervals of 30 seconds (total time of 2–3 min.). The melting temperature is between 55 and 65 degrees. Do not heat above 95 degrees.3 
Add the colour and stir into the melted wax.
Add the colour and stir into the melted wax.4 
Stir until the colour is completely dissolved in the wax.
Stir until the colour is completely dissolved in the wax.5 
Thread a 15 cm candle wick through the candle needle. Insert the candle needle through the middle of the bottom of the silicone mould and pull the candle wick through, leaving 5 cm. The silicone will seal around the candle wick to prevent wax leakage.
Thread a 15 cm candle wick through the candle needle. Insert the candle needle through the middle of the bottom of the silicone mould and pull the candle wick through, leaving 5 cm. The silicone will seal around the candle wick to prevent wax leakage.6 
Tie the candle wick around the candle needle or use a stick to keep it securely in the middle of the candle. Pour the melted candle wax into the mould.
Tie the candle wick around the candle needle or use a stick to keep it securely in the middle of the candle. Pour the melted candle wax into the mould.7 
Place the candle on a flat surface.
Place the candle on a flat surface.8 
Allow the candle to set for 6–8 hours. Cut off the excess wick from the bottom.
Allow the candle to set for 6–8 hours. Cut off the excess wick from the bottom.9 
Carefully remove the candle from the mould to avoid making any marks in the wax.
Carefully remove the candle from the mould to avoid making any marks in the wax.10 
Allow the candle to harden for 48 hours before lighting.
Allow the candle to harden for 48 hours before lighting.11 
Cast bubble candles in different shades of blue. Mix 0.1 g, 0.5 g and 0.9 g blue dye, respectively, with 40 g of soy wax.
Cast bubble candles in different shades of blue. Mix 0.1 g, 0.5 g and 0.9 g blue dye, respectively, with 40 g of soy wax.Already signed up? Download the template
Also go exploring in
