Build your own race car

1 Choose colours for the race car and paint all the parts. Paint one side, allow to dry and then paint the other side. Apply two coats of paint for an opaque effect. Allow all parts to dry completely before assembling.

2 Put a dab of multi glue in the hole of each wheel.

3 Press the two pins into each wheel and insert both pins through the car.

4 Press the last two wheels firmly in place.

5 Apply a little multi glue to the back of the two triangles.

6 Press the triangles firmly on each side of the car between the wheels, with the wide end at the back.

7 Turn the car upside down and glue on the front spoiler. Allow the glue dry a little before turning the car over again.

8 Apply a dab of multi glue to the bottom of the two rear spoiler supports and press them firmly onto the rear of the vehicle.

9 Apply a dab of multi glue to the top of the two supports.

10 Press the spoiler firmly onto the supports.

11 Glue in the cockpit.

12 Glue the helmet to the top of the cockpit.

13 Allow the glue to dry completely and then decorate the race car with the stickers provided. Remember that the glue dries slowly, so it will need 24 hours before it has reached its full strength.

14 Front view of the car with stickers.

15 The car with stickers seen from the back.