A hanging organiser decorated like a playhouse with iron-on foil

#v15789

Decorate a fabric hanging organiser with iron-on foil. Cut out the iron-on foil using templates and add details with a black textile marker. The pockets may be used for toys, hair accessories, small books etc. and it is therefore ideal to use for storage in the nursery.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Print out the template which is available as a separate PDF file for this idea. Cut out the templates and copy them onto the back of the iron-on foil. Cut out. A tip: use a pen so that the template is easily visible and won't get smudged.
Guide step %d
2   Place the iron-on foil cut-outs one by one with the front face up and iron the cut-outs directly onto the hanging organiser pockets using an iron set on a medium temperature. You can iron directly on the iron-on foil because the top layer of the iron-on foil is covered by a special thick plastic protective layer. The black textile marker details need fixing with an iron as well. However, don't remove the thick plastic protective layer on the iron-on foil until the entire house design is finished. The iron-on foil will melt when using an iron if the thick plastic protective layer is removed.
Guide step %d
3   Here is an example of how to decorate the hanging organiser.
Guide step %d
4   Measure to draw an angled roof. Draw lightly with a pencil.
Guide step %d
5   Measure 9 cm from the side and make a mark just below the casing for the stick (which will be inserted at a later stage). Take note of the distance from the top and draw a mark at the opposite side where you have also measured 9 cm from the side.
Guide step %d
6   Draw a pencil line across at the top of the hanging organiser to mark the top of the roof. Draw another line from the top line and angled down to the outside of the top pockets on each side as shown in the photo.
Guide step %d
7   Now draw the roof with a black textile marker and add further details with a black textile marker.
Guide step %d
8   Fix the textile marker details with an iron enabling you to hand wash the hanging organiser. Attach the last few iron-on foil details if you want further details on top of the textile marker roof like, for example, the bird which is placed on the roof.
Guide step %d
9   Once all details are ironed on, remove the thick protective plastic layer from the iron-on foil.
Guide step %d
10   Tie a thin piece of polyester cord around each end of the wooden stick which is inserted though the casing at the top of the organiser.
Guide step %d
11   Here is the finished hanging organiser.
Guide step %d
Another example   -
Guide step %d
Another example   -
Guide step %d
Another example   -
Guide step %d
Template   -
Attached file: Download
Already signed up? Download the template
Also go exploring in
Go back
I'm shopping as
Continue as guest
Your benefits of login

✔ Your personal wishlist

✔ See your order history

✔ Easy checkout
Your benefits of login

✔️ Your special prices

✔️ Special B2B products

✔️ B2B marketing universe
Your benefits of login

✔ Content especially for you

✔ Your special prices
Copyright © 2021-present Creativ Company Ltd. All rights reserved | 2 Pine Court | Kembrey Park | Swindon | Wiltshire | SN2 8AD | 01793 616 068 | admin@cc-craft.co.uk