Covered Hat Boxes
#v11684
Save 25% on everything*
Use the code: 251626
*Valid from 15.04.2024-18.04.2024 | The discount code is only valid for a minimum order value of £35 | The discount code only applies to craft items and not to already reduced items | The offer is only available to private customers | See additional terms under terms and conditions
Glued onto square hat boxes using VTR Adhesive.
How to do it Download the templates/recipes
.jpg)
1 Measure the height of the box + 2cm in each side. The best result is achieved when finishing at a corner. The first piece of paper extends 2cm around the corner.
2 Apply a thin layer of glue onto the box to prevent it sucking the glue from the paper. Also apply glue to the paper.
3 Put on the paper and smooth out air bubbles.
4 Cut a notch in each corner and fold down the flaps. Remember to glue.
5 Glue on the next piece of paper exactly from one corner to the next. Always cut it a bit smaller, as the glue makes the paper expand
.jpg)
6 Measure the base, cut (slightly smaller) and glue on.
7 For the lid, cut away paper for the corner as shown.
8 Fold down the flaps and glue in the order as shown.
9 At the intersections on the largest boxes, the best result is achieved when you manage to get the pattern to fit. The edges abut or overlap 1cm.
Already signed up? Download the template
Also go exploring in
