Are you shopping from Ireland? Please continue to cc-craft.ie

Homemade bars of soap with relief designs

SKU
v15871

Make your own soap with the relief technique. You will need 600 g soap base to make 6 bars of soap. Remember to place your bar of soap in a soap dish, allowing it to dry out between each use or tie a string for hanging onto the soap.

Select products for the idea

* Required Fields

Samlet pris for valgte produkter
Your Customization
Homemade bars of soap with relief designs
Homemade bars of soap with relief designs

In stock

£2.45

Summary
    How to do it
    Guide step %d
    1
    Weigh the soap base. You will need 100 g soap base per finished bar of soap. You can melt the soap base either in a water bath or in a microwave when it is cut into 3 x 3 cm chunks. Melt in the microwave at 80% power with 30 second intervals and stir between each interval to prevent heat damage. We recommend you use gloves because the soap base gets hot and because the essential oil is very concentrated.
    Guide step %d
    2
    Wash the mould and spray it with rubbing alcohol. Leave to dry. Place silicone stamps on the bottom of the moulds and make sure that they are secured to the bottom.
    Guide step %d
    3
    Add 1 cm soap dye paste and 3 drops of essential oil per 100 g soap base. Stir well.
    Guide step %d
    4
    Carefully pour the molten soap into the mould, taking care that the silicon stamp at the bottom doesn't move.
    Guide step %d
    5
    Remove any air bubbles from the surface by spraying with rubbing alcohol.
    Guide step %d
    6
    Repeat steps 3-5 with different soap dye pastes. You may mix the soap dye pastes with each other as shown in the photo; for a delicate peach colour, mix 0.5 cm pink and 0.5 cm yellow soap dye paste.
    Guide step %d
    7
    Remove the bars of soap from the mould once hardened after 1-2 hours. Carefully remove the silicon stamps without scratching the bars of soap.
    Guide step %d
    8
    Carefully make a hole in the middle approx. 1 cm from the top edge using a knitting needle or similar. Support the bar of soap on the back to prevent it from breaking. Cut a 50 cm piece of natural hemp, feed it through the hole and tie a knot; one by the soap and one a bit higher up, forming a loop for hanging.
    Guide step %d
    9
    Here are other variants of the bars of soap.
    Copyright © 2013-present Creativ Company Ltd. All rights reserved | 2 Pine Court | Kembrey Park | Swindon | Wiltshire | SN2 8AD | 01793 616 068 | admin@cc-craft.co.uk