Are you shopping from Ireland? Please continue to cc-craft.ie

Jewellery School. Jewellery on Beading Wire with a Clasp

SKU
v12294

Beading wire consists of several twisted plastic covered strands, making it flexible and strong. Beading wire with many strands is soft and is used for delicate/light beads. Beading wire with fewer stands is for large/heavy beads. Finish with a clasp.

Select products for the idea

* Required Fields

Samlet pris for valgte produkter
Your Customization
Jewellery School. Jewellery on Beading Wire with a Clasp
Jewellery School. Jewellery on Beading Wire with a Clasp

In stock

£3.90

Summary
    How to do it
    Guide step %d
    1.
    Start by threading a bead tip and a crimp bead onto the wire. Squeeze the crimp bead flat.
    Guide step %d
    2.
    Cut off the beading wire right after the crimp bead.
    Guide step %d
    3.
    Close the bead tip around the crimp bead. Thread beads onto the beading wire.
    Guide step %d
    4.
    Use the same closing procedure at the opposite end. At this end, squeeze the crimp bead flat into the bead tip. Fill the beading with beads but do not make it too tight.
    Guide step %d
    5.
    Attach the clasp: Insert a round jump ring into the loop of the bead tip and close it with two flat nose pliers. Slightly twist the ends past each other whilst they scrape against each other. Only twist to the side – never apart.
    Guide step %d
    6.
    When the two ends of the round jump ring are exactly opposite each other, finish twisting.
    Guide step %d
    7.
    Before closing the round jump ring at the other end, attach a lobster claw clasp.
    Guide step %d
    8.
    TIPS: A clasp and round jump rings easily add another 2 or 3cm to the length of the necklace. Include this in the desired finished length.
    Guide step %d
    9.
    Variant: Individual beads on the wire. The beads are held in place with crimp beads. Squeeze the crimp bead flat with crimping pliers. Place the crimp bead and squeeze as shown on each side of the bead.
    Guide step %d
    10.
    Squeeze the crimp bead flat, forming a curve.
    Guide step %d
    11.
    Assemble the curve to make a round bead using the outer jaws on the pliers.
    Also go exploring in
    Copyright © 2013-present Creativ Company Ltd. All rights reserved | 2 Pine Court | Kembrey Park | Swindon | Wiltshire | SN2 8AD | 01793 616 068 | admin@cc-craft.co.uk