A Helsinki Pocket Card

#v11257

Made from a single piece of folded paper. Decorated with brads and a punched border. Pocket tags made of cardboard and decorated with paper and ribbons.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Cut a piece of Vivi Gade Design paper from the Helsinki series size 28x28cm. Fold in half from the bottom up and open the paper again.
Guide step %d
2   Fold in half from the left to the right. Open the paper again.
Guide step %d
3   Cut in the fold in the middle as shown in the photo.
Guide step %d
4   Make a fold in the lower right corner. The length is 8cm.
Guide step %d
5   Make a fold in the upper left corner. The length is 12x12cm.
Guide step %d
6   In the lower right corner attach double-sided adhesive pre-cut strips as shown.
Guide step %d
7   Close.
Guide step %d
8   Also, attach double-sided adhesive pre-cut strips on the top left corner as shown in the photo.
Guide step %d
9   Close.
Guide step %d
10   Attach double-sided adhesive pre-cut strips as shown on the photo.
Guide step %d
11   Fold over towards the left and press down the side firmly.
Guide step %d
12   Punch a border, 16cm in length, from green design card and insert a satin ribbon.
Guide step %d
13   Secure the ribbon onto the border with E-Z runner tape. A small strip is enough to keep it in place.
Guide step %d
14   Put tape onto the back of the border in the same manner as shown in the photo.
Guide step %d
15   Place the paper so that it is turned as shown in photo.
Guide step %d
16   Attach the border onto the edge and decorate with brads. Make a small hole with an art knife, attach the brad and and push the legs out to each side on the back.
Guide step %d
17   Turn the paper and attach the tape as shown in the photo.
Guide step %d
18   Fold up the bottom left flap. (This is now the back of the front).
Guide step %d
19   Close.
Guide step %d
20   Cut a piece of green design card measuring 13x13cm and punch a border along one side. Attach white design card behind it so that a small edge peeps through. Then glue this onto the innerside of the card to stiffen the side and to form a clean area to write on.
Guide step %d
21   Make two tags for the pockets. These measure 6x17cm. Cut off the corners and make holes for a ribbon. Fold 6cm from the bottom edge.
Guide step %d
22   Tear off the top edge, so you can see the white core of the paper. Tear two strips of paper and glue them on underneath. Cut off the excess paper along the edge.
Guide step %d
23   Glue along the two sides as shown in the photo.
Guide step %d
24   Close. Attach a ribbon in the top, insert a note into the pocket if you wish and your tag is now ready to be inserted into the pocket on the front of the card.
Already signed up? Download the template
Also go exploring in
Go back
I'm shopping as
Continue as guest
Your benefits of login

✔ Your personal wishlist

✔ See your order history

✔ Easy checkout
Your benefits of login

✔️ Your special prices

✔️ Special B2B products

✔️ B2B marketing universe
Your benefits of login

✔ Content especially for you

✔ Your special prices
Copyright © 2021-present Creativ Company Ltd. All rights reserved | 2 Pine Court | Kembrey Park | Swindon | Wiltshire | SN2 8AD | 01793 616 068 | admin@cc-craft.co.uk