An Angel on a Stand made from black Alu Wire with Diamond Cut

An Angel on a Stand made from black Alu Wire with Diamond Cut

Inspiration: 13192

From: £2.26

To: £107.89

Total price: £0.00

Incl. VAT

Availability: In stock

From: £2.26

To: £107.89

The angel is shaped from black aluminium wire with inlaid diamond cut. Then it is attached onto a stick on a stand. A halo made from mother-of-pearl wax beads threaded onto a piece of silver-plated wire.

Guide step 1
1.
Cut a 55cm long piece of aluminium wire. Form a circle with a diameter of approx. 7cm. You may use the circumference of a bowl or a glass for getting the right shape. Secure the ends of the circle by twisting them together.
Guide step 2
2.
Shape the long piece of the aluminium wire into one of the dress braces and a head at the top.
Guide step 3
3.
Cut two 40cm long pieces of aluminium wire. Attach them onto the bottom of the dress by twisting them around a couple of times on either side of the dress brace. Twist one around one of the dress braces which is already made (this will be the back of the angel).
Guide step 4
4.
Cut eight 40cm long pieces of aluminium wires. Distribute them evenly around the bottom of the dress. Do not attach them to the head/neck at the other end.
Guide step 5
5.
The aluminium wire which finishes the circle is now fed up through the angel and twisted around its neck. This will be used for attaching the wings. Push three wires down on either side of this dividing wire. These will be the angel's wings.
Guide step 6
6.
Gather the two wings (each made from three aluminium wires) at the angel's neck and secure with the aluminium wire which divide them. Twist this around all six aluminium wires at the neck.
Guide step 7
7.
At the other end: assemble each wing consisting of three pieces of aluminium wire onto the angel's back – one wire at a time - with a twist onto the same aluminium wire on the angel's back.
Guide step 8
8.
Thread mother-of-pearl beads with a star-shaped bead in the middle onto the thin silver-plated wire. Measure the angel's head and close the finished halo with a twist.
Guide step 9
9.
Attach the finished angel onto a stick with a stand.

Buy items for the idea

Total price: £0.00

Incl. VAT