A Pallet Podium with self-adhesive Film

A Pallet Podium with self-adhesive Film

Inspiration: 15229
£0.00

Total price: £0.00

Incl. VAT

Availability: Out of stock

£0.00
Make your very own podium from half pallets and decorate it using self-adhesive film with beautiful patterns. The finished podium measures: H (with castors: 58 cm – without castors: 45 cm). L: 83 cm and W: 63 cm.
Guide step 1
Step 1.
Begin by putting the two half pallets together and then screw on one of the sides. The two short pallet sides measure: 60 x 45 cm and the two long sides measure 83 x 45 cm.
Guide step 2
Step 2.
Insert a screw at each end of the board approx. 2 cm from the edge. A piece of scrap wood is here used for measuring how far up the screw should be positioned so that the top will eventually be at the right height relative to the sides.
Guide step 3
Step 3.
Continue to screw the remaining sides onto the pallets as well as the screws which will support the top.
Guide step 4
Step 4.
The podium without the top.
Guide step 5
Step 5.
Place the top board onto the screws. The measurements of the top board are 60 x 80 cm.
Guide step 6
Step 6.
Screw on the top board.
Guide step 7
Step 7.
Screw on the casters.
Guide step 8
Step 8.
The podium is now finished.
Guide step 9
Step 9.
The self-adhesive film fits across the width of the 45 cm wide podium. Start with the sides and make sure to start away from the edge on one side, so that the foil can overlap. Finish with the top board; attach the foil 2 cm over the sides so that you can cut a notch for the corners to be stuck down over the sides.

Buy items for the idea

Total price: £0.00

Incl. VAT