15576b620c259e.jpg)
A Greeting Card with Dots and Stars on an Invitation
#v12919
A blank greeting card with a pearlescent effect. It is decorated with Vivi Gade Design paper as well as card and paper from the Color Bar series. Finally the greeting card is decorated with punched-out stars, rhinestones, cotton cord and Pearl Pen.
#v12919
How to do it Download the templates/recipes
1. Cut the paper and card to fit the greeting card and attach these onto the greeting card with double-sided adhesive tape.
2. Cut out a star from the dotted paper slightly larger than the large ready-made star.
3. Glue the two stars together and attach them to the greeting card with double-sided adhesive tape. Cut off the excess card star.
4. Decorate with self-adhesive rhinestones.
5. Use hole punch pliers to make a hole through both layers of the greeting card. Tie a piece of cotton cord through the hole.
6. Decorate the greeting card with dots made with a Pearl Pen.
7. Print a photo, trim and attach it to the greeting card.
8. Menu cards: Cut a 21 x 21cm piece of Color Bar card. Use a bone folder or a blunt needle to score the card, dividing it into three equal parts (i.e. 3 x 7cm).
9. Cut a piece of card and a piece of paper slightly smaller than 7 x 21cm and attach both to the card – on either side - using double-sided adhesive tape. Attach the printed menu in the middle.
10. Punch-out stars from Color Bar card.
11. Attach the stars to the card randomly using 3D foam pads. Make a hole in the card and tie with a piece of cotton cord. Now a party song on a folded piece of paper can be attached on the inside.
An example -
An example -
Already signed up? Download the template
Also go exploring in
