A decorative plate from self-hardening clay with a glazed effect

#v15890

Save 25% on everything*

Use the code: 654895

*Valid from 18.03.2024-21.03.2024 | The discount code is only valid for a minimum order value of £35 | The discount code only applies to craft items and not to already reduced items | The offer is only available to private customers | See additional terms under terms and conditions

Make your own decorative plates from white self-hardening clay. Decorate with a glazed effect made from Plus Color craft paint mixed with Pouring Fluid.

Select products for the idea

{{ optionsGroup.label }}

{{ getVariantsButtonText(option) }}
   
 
 
   
 
 
   
 
 
   
 
 
   
 
 
Total price
{{ getFormattedBundlePrice() }}

{{ getRewardMessage() }}

Guide step %d
1   Roll out the clay using two 8 mm round wooden sticks to achieve the same thickness of the plate. The clay must be min. 7 mm thick.
Guide step %d
2   Place the attached template on top of the clay and cut out.
Guide step %d
3   Remove the excess clay.
Guide step %d
4   Dip the modelling tool in water and smooth out the edge.
Guide step %d
5   Make a hole for hanging and leave to dry. Turn the plate over a couple of times whilst drying. A tip: If cracks appear in the clay bowl once dry, you can repair these by mixing a small amount of clay with a bit of water to form a creamy consistency. Fill the cracks with the mixture, preferably with a brush. Leave to dry. Any uneven areas on the plate can be sanded smooth with a sanding sponge or with fine sandpaper.
Guide step %d
6   Drying time is approx. 48 hours depending on the room temperature. You may place it near a heat source (radiator) for drying. Mix the glaze when the plate is completely dry. Mix Plus Color craft paint with Pouring Fluid. The mixing ratio is approx. 1 part paint to 4 parts of Pouring Fluid. The finished mixture must be runny. You may test on a piece of card. Mix an amount according to the size of the refillable plastic bottle. Pour the mxiture into the plastic bottle.
Guide step %d
7   Draw a wave on the plate with the mixture from the bottle.
Guide step %d
8   Fill in the top part of the plate with the paint and the Pouring Fluid mixture from the bottle.
Guide step %d
9   Hold the plate at an angle. Add drops of the paint mixture along the edges of the waves to make them run. Place the plate down flat when you want to stop the paint running.
Guide step %d
Template   -
Attached file: Download
Already signed up? Download the template
Also go exploring in
Go back
I'm shopping as
Continue as guest
Your benefits of login

✔ Your personal wishlist

✔ See your order history

✔ Easy checkout
Your benefits of login

✔️ Your special prices

✔️ Special B2B products

✔️ B2B marketing universe
Your benefits of login

✔ Content especially for you

✔ Your special prices
Copyright © 2021-present Creativ Company Ltd. All rights reserved | 2 Pine Court | Kembrey Park | Swindon | Wiltshire | SN2 8AD | 01793 616 068 | admin@cc-craft.co.uk