A braided Bracelet made from Resin Beads and Crystal Beads

A braided Bracelet made from Resin Beads and Crystal Beads

Inspiration: 13588

From: £3.20

To: £62.81

Total price: £0.00

Incl. VAT

Availability: In stock

From: £3.20

To: £62.81

This wide bracelet is made from glossy polyester cord with faceted glass beads and resin beads in three rows. A two-part magnetic clasp is glued onto each end for fastening.

Guide step 1
1.
Tie three approx. 80cm long pieces of polyester cord in a knot and secure in a macramé board.
Guide step 2
2.
Thread beads onto the three pieces of cord; approx. 12 faceted glass beads onto the middle cord and approx. 13 resin beads onto the cords at either side. Assemble the ends at the bottom of the macramé board with a metal clip.
Guide step 3
3.
Cut two approx. 150cm pieces of polyester cord. Arrange these so that the middle is underneath the three cords with the beads. Start braiding. NB: see idea No. 12499 on our website for instructions.
Guide step 4
4.
Make three or four double braiding knots.
Guide step 5
5.
Secure two of the four braiding cords in the clip at the top of the macramé board. Use the remaining two braiding cords and make a braiding knot on the middle cord.
Guide step 6
6.
Push up the bead on the far left and make a braiding knot around this cord, using the two braiding cords on the left hand side. Repeat this process on the right hand side.
Guide step 7
7.
Push up the glass bead on the middle cord and make a double braiding knot with the bottom two of the four braiding cords.
Guide step 8
8.
Repeat the process shown until all beads are in place – or until the bracelet is the desired length. Now finish with three or four double braiding knots.
Guide step 9
9.
Use Clear Multi Glue Gel for gluing the cords together at each end. Let them dry and trim the ends. Fill both parts of the two-part magnetic clasp with glue and push the ends of the bracelet inside each part of the magnetic clasp. Leave to dry.
Guide step 10
Another example
Other colour combinations

Buy items for the idea

Total price: £0.00

Incl. VAT