Jewellery School. Rings

Jewellery School. Rings

Inspiration: 12722

From: £1.42

To: £305.56

Total price: £0.00

Incl. VAT

Availability: In stock

From: £1.42

To: £305.56

A ring shaped from a silver-plated wire on a ring stick. It is then decorated with beads which can be attached in two ways; either by “sewing” them on with silver-plated wire or by putting beads onto head pins, attaching them to the ring like pendants.

How to do it
Guide step 1
1.
Measure the appropriate ring size using the ring sizer.
Guide step 2
2.
The size can be found on the ring stick.
Guide step 3
3.
Wrap the silver-plated wire tightly around the ring stick at the correct size number.
Guide step 4
4.
Let the two ends overlap and then wrap the ends around the ring. This now forms the bottom of the ring.
Guide step 5
5.
Use a new piece of silver-plated wire; wrap it along the top of the ring towards the middle and bend it straight upwards. Take another piece of silver-plated wire; wrap it along the top of the ring and towards the middle. Wrap the end around the piece which is bent upwards.
Guide step 6
6.
Put the bead onto the stalk.
Guide step 7
7.
Use the tip of round nose pliers to twist the wire forming a coil. Nip off the end.
Guide step 8
Sew beads onto a ring
Fasten the wire to the sieve disc.
Guide step 9
2.
Thread the beads onto the wire 1 – 2 – 3 at a time whilst “sewing” up and down through the holes of the sieve disc – and around the ring.
Guide step 10
Decorate a ring
Put small beads onto head pins and bend them a little to one side and cut off leaving approx. 1cm of the head pin.
Guide step 11
2.
Twist to form a loop (do not close it completely). Use round nose pliers.
Guide step 12
3.
Attach the loop from the headpin onto the loop on the ring. Now close it completely. Attach three pendants to each loop.

Buy items for the idea

Crystal Beads, size 10x12 mm, hole size 1 mm, ink, flat round shaped, 30pcs
  • Buy 5 packs of same or more for £4.20 each and save 10%

Total price: £0.00

Incl. VAT