3D reindeer and fused bead Christmas gifts

1 Use a transparent peg board and place it on top of the template. Place the beads according to the pattern in the desired colours.

2 Place a piece of baking paper over the finished peg boards and gently iron the beads. Do not press them flat, as this will make it difficult to assemble the parts later. Iron one side first while the design is still on the peg board. Next, remove the beads from the peg board, turn the design over, place baking paper on top again and gently iron the other side. The beads should be stuck together, but still retain their shape.

3 Assemble the parts by placing them as shown in the picture and carefully click them together. The plate furthest to the right should be placed last after the other parts are joined. Finally, attach the bow to the small hole for this purpose.

4 Here you can see the finished present. Repeat steps 1-3 to make the remaining presents.

5 Repeat steps 1-2 to make the reindeer. Next, assemble the reindeer by following the next step.

6 This is what the finished reindeer look like. Finish off your little presents and reindeer with a sprinkle of glitter: First brush a little glue on the surface, then sprinkle glitter over it and allow to dry. Your lovely Christmas creations are now ready for use.